MHM Machineries BD Limited

Oxy-Hydrogen Machine Price in Bangladesh

An oxy-hydrogen machine — also called an HHO or Brown’s gas generator — splits distilled water by electrolysis into a hydrogen and oxygen mixture and delivers it on demand, so no hydrogen gas is stored on site. MHM Machineries BD Ltd supplies oxy-hydrogen machines in Bangladesh from its office at Mirpur, Dhaka, and quotes them against your application and the gas output you need.

Green oxy-hydrogen generator on castors with its water bubbler bottle
An oxy-hydrogen generator from MHM’s product photographs: the cabinet holds the cell and power supply, the steel bottle on the side is the water bubbler.
  • Hydrogen and oxygen made from water, as it is used
  • No gas cylinder inventory on the premises
  • Bench and trolley-mounted machines
  • Written quotation against your application

Updated 21 October 2026 · MHM Machineries BD Ltd, Mirpur, Dhaka

At a glance

What it is
An electrolysis gas generator: water in, hydrogen and oxygen out, made on demand
Also called
HHO generator, Brown’s gas generator, water welder, hydrogen gas generator
Consumes
Electricity and distilled or demineralised water with an electrolyte
Typical uses
Flame polishing of acrylic, brazing and soldering, glass work, combustion support
How price is set
By gas output in litres per hour first, then cell, power supply, outlets, safety package and origin
Related system
The industrial fuel saving system applies the same gas to generators and boilers

Oxy-Hydrogen Machine

How it works, in five sentences.

Bench-size oxy-hydrogen (HHO) machine with pressure gauge and bubbler bottle
A bench-size oxy-hydrogen machine with its pressure gauge and bubbler bottle.

An electric current is passed through distilled water carrying an electrolyte inside a sealed cell. The water separates into hydrogen and oxygen, which leave the cell together in the same two-to-one ratio by volume in which they were bound in the water. Because the gas is made only as fast as it is used, there is no cylinder inventory: output is set by the electrical input and the cell size, not by what is in a store room.

The gas passes through a bubbler and a flashback arrestor before it reaches a torch tip or a combustion air inlet. The flame is small, very hot and carbon-free, which is exactly why it is used for finishing work where a soot mark is a reject.

One litre of water, how much gas?

One litre of water is about 55.5 moles of H2O, which splits into 55.5 moles of hydrogen and 27.8 moles of oxygen — about 1,860 litres of mixed gas at 0 °C and atmospheric pressure. That is the chemistry ceiling; what a machine actually delivers per kWh is the figure to ask for on the specification sheet.

Hydrogen gas price in Bangladesh — buying cylinders or making it on site

People searching for a hydrogen gas price are often comparing two different things.

Bottled hydrogen is bought by the cylinder, with a cylinder rental or deposit, a delivery schedule and a store of compressed flammable gas on the premises. An oxy-hydrogen machine is a one-time equipment purchase whose running cost is the electricity it draws and the distilled water it splits. It delivers a hydrogen-oxygen mixture for a flame, not pure hydrogen for a process that needs pure gas.

So the comparison is not price per cylinder against price per machine. It is the cost of the gas you actually burn in a month by each route: cylinders, rental and handling on one side; machine, electricity, distilled water and cell maintenance on the other.

To compare the two routes on your own work

  • Write down how many cylinders the bench uses in a month today
  • Ask for the machine’s gas output in litres per hour and its electrical input in kW
  • Multiply the input by your running hours and your tariff
  • Add distilled water, electrolyte and the cell maintenance interval
  • Set the total against the cylinder bill, rental and handling

What the specification sheet must state

MHM quotes each machine against the application. Whichever supplier you compare, these are the lines a written specification should carry — a quotation that leaves them blank cannot be compared with another.

Swipe the table sideways to see every column.

Oxy-hydrogen machine — specification lines to ask for
ParameterUnitWhy it matters
Gas outputlitres per hourEverything else scales from it — the cell, the power supply and the water handling
Electrical inputkWMultiplied by running hours, it is the running cost
Supply voltage and phaseV / phaseDecides whether the machine can sit on the bench circuit or needs a three-phase feed
Working pressurebarMust match the torch or the induction point it feeds
Water consumptionlitres per hourSmall, but it is distilled water, so it is a standing purchase
Electrolytetype and dosingWhat is added to the distilled water, and how often it is topped up
Torch outletsnumberOne machine can serve several benches
Safety deviceslistFlashback arrestor, bubbler, level, temperature and dry-run protection
Dimensions and weightmm / kgBench, trolley or floor-standing
Origin and warranty—Where it is made, and what the warranty covers on the cell as against the rest

Specifications are subject to change according to the requirement, brand, availability and other variables.

What determines the price of an oxy-hydrogen machine

Gas output in litres per hour is the first number, because everything else scales from it.

Swipe the table sideways to see every column.

What moves the price of an oxy-hydrogen machine
Cost driverWhy it changes the priceEffect
Gas output (l/h)The cell, the power supply and the water and electrolyte handling all grow together.The largest single driver
Cell construction and plate materialPlate material and cell design decide how long the cell lasts on the water you actually run.Decides service life
Power supply rating and regulationA well-regulated supply holds a steady flame and protects the cell.Significant on larger machines
Number of torch outletsOne machine can serve several work benches.Moves with the number of operators
Safety and control packageFlashback arrestor, bubbler, level, temperature and dry-run protection.Never the line to save on
Origin and lead timeAn imported unit carries freight, LC and duty on the day.Moves with the exchange rate
Installation and operator trainingPositioning, electrical connection, first fill and handover.Quoted separately

A small bench machine for a jewellery workshop and a unit sized for combustion support on a generator are different classes of equipment. Send the application and MHM will quote the size that fits, with equipment and installation as separate lines.

Where oxy-hydrogen machines are used

Acrylic and signage fabrication

A saw or router leaves an acrylic edge matt. A brief pass with an oxy-hydrogen flame melts the surface of the cut and the edge comes back clear, with no soot to clean off afterwards — which is why sign and display workshops use it for edge polishing.

Jewellery and small metal work

A concentrated, clean flame for brazing and soldering gold and silver, with no fuel-gas cylinder in the workshop. Output is set at the machine, so a fine flame is repeatable between operators.

Glass working and ampoule sealing

Glass tube working and the sealing of ampoules, where a carbon deposit inside a sealed container would be a contamination failure rather than a cosmetic one.

Combustion support on generators and boilers

The same gas can be fed into the combustion air of a diesel or gas engine or a steam boiler. That application has its own equipment, sizing and verification method.

Maintenance workshops

Light brazing on refrigeration and air-conditioning pipework and other small heat work, where the alternative is keeping fuel-gas cylinders in a workshop that would rather not store them.

Laboratories and training

Where a small, clean, controllable flame is needed for demonstration or bench work, an on-demand generator avoids storing a hydrogen cylinder on the premises.

Safety and site requirements

No stored gas is a different risk profile from bottled fuel gas — it is not the same as no precautions.

Because the gas is generated only while the machine runs and only in the volume being drawn, there is no stored gas inventory on the premises. Hydrogen is still a flammable gas. A flashback arrestor must be fitted and in date, the bubbler must be kept at the correct level, the area needs adequate ventilation, and the operator needs training on start-up, shutdown and what to do if the flame goes out.

Water must be distilled or demineralised with the specified electrolyte; tap water attacks the cell and shortens its life. Follow the manufacturer’s safety instructions supplied with the unit.

Site checklist before delivery

  • A stable electrical supply at the rated voltage and phase
  • A level bench or floor space for the cabinet
  • Ventilation at the work position
  • A supply of distilled or demineralised water
  • A named, trained operator

Installation, commissioning and after-sales

What a complete supply should include — ask for each line in writing.

  1. Positioning and electrical connection. On the rated supply, with the cabinet level and ventilated.
  2. First fill. Distilled water and electrolyte to the specified level and strength.
  3. Output check at the torch. Flame and output verified against the specification sheet.
  4. Safety-device test. Flashback arrestor, bubbler level, temperature and dry-run cut-outs tested in front of the operator.
  5. Operator handover. Start-up, shutdown, refilling and what to do if the flame goes out.
  6. After-sales. Cell cleaning and electrolyte replacement intervals, flashback arrestor replacement and spares.

See installation, maintenance and repair services.

সংক্ষেপে — বাংলায়

Oxy-hydrogen machine (HHO বা Brown’s gas generator) বিদ্যুৎ দিয়ে distilled water ভেঙে hydrogen ও oxygen তৈরি করে — আয়তনের হিসাবে ২:১ অনুপাতে — এবং যতটুকু ব্যবহার হচ্ছে ঠিক ততটুকুই তৈরি করে, তাই কোনো hydrogen gas cylinder মজুত রাখতে হয় না।

ব্যবহার: acrylic-এর কাটা প্রান্ত flame polishing, স্বর্ণ-রূপার brazing ও soldering, glass ও ampoule sealing, এবং generator বা boiler-এ combustion support। দাম মূলত নির্ভর করে gas output (litre per hour), cell ও plate material, power supply, torch outlet সংখ্যা এবং safety package-এর উপর।

Hydrogen gas-এর দাম তুলনা করতে হলে cylinder-এর মাসিক খরচের পাশে machine-এর বিদ্যুৎ (kW × চলার ঘণ্টা), distilled water ও cell maintenance-এর খরচ রাখুন। মেশিনে অবশ্যই distilled water ব্যবহার করতে হবে — tap water cell নষ্ট করে দেয়। ফোন +880 1767-004433।

Frequently asked questions

What is an oxy hydrogen machine?

An oxy hydrogen machine, also called an HHO generator or a Brown’s gas generator, passes an electric current through distilled water containing an electrolyte and splits it into hydrogen and oxygen. The two gases leave the cell together in the same two to one ratio by volume in which they were combined in the water, and the mixture is burned at a torch or fed into a combustion air stream. The gas is produced on demand, so no gas is stored on the premises.

What is the price of an oxy hydrogen machine in Bangladesh?

Price follows gas output in litres per hour first, then the electrical input rating, the cell construction and materials, the number of torch outlets, the control and safety equipment fitted, and the origin and lead time. A small bench machine for a jewellery workshop and a unit sized for combustion support on a generator are different classes of equipment. Send the application and the required gas output to MHM Machineries for a written quotation.

Is an oxy hydrogen machine cheaper than buying hydrogen gas cylinders?

It depends on how much gas you burn. A machine is a one-time purchase whose running cost is electricity and distilled water; cylinders are a recurring purchase with rental and handling. Compare the monthly cost of the gas you actually use by each route, using the machine’s stated gas output and electrical input. Note that the machine delivers a hydrogen-oxygen mixture for a flame, not pure hydrogen.

What is an oxy hydrogen machine used for?

The common industrial uses are flame polishing the cut edges of acrylic sheet, brazing and soldering in jewellery and small metal work, glass working and ampoule sealing, and combustion support where the gas is introduced into the air supply of a generator or a boiler. The flame is small, concentrated and free of carbon deposit.

Is an oxy hydrogen machine safe to run in a factory?

The gas is generated only while the machine is running and only in the volume being consumed, so there is no stored cylinder inventory on the premises. Hydrogen is still a flammable gas, so a flashback arrestor, a correctly maintained bubbler, adequate ventilation and a trained operator remain necessary. Follow the manufacturer’s safety instructions supplied with the unit.

What does an oxy hydrogen machine consume?

Electricity and water. The electrical input rating multiplied by running hours gives the units consumed. Water consumption is small because only the water that is split is used — one litre of water makes about 1,860 litres of mixed gas at standard conditions — but it must be distilled or demineralised water with the specified electrolyte. Tap water damages the cell.

What is the difference between an oxy hydrogen machine and a fuel saving system?

Both make the same gas by electrolysis. An oxy hydrogen machine delivers it to a torch for heat work. A fuel saving system feeds a small, metered flow of it into the combustion air of a generator or boiler. MHM lists its fuel saving systems for 1 MW to 2.5 MW generators and boilers up to 2.5 tons on a separate page.

Who supplies oxy hydrogen machines in Bangladesh?

MHM Machineries BD Ltd supplies oxy hydrogen machines in Bangladesh and quotes them against the application and the gas output required. The office is at 846, East Shewrapara, Mirpur, Dhaka-1216, Bangladesh. Call +880 1767-004433 or e-mail sales@mhmmachineries.com.

Get a written quotation

Describe the work — edge polishing, brazing, glass sealing or combustion support — and MHM Machineries BD Ltd will recommend a size and quote it, with the specification lines above filled in.

  • Gas output, electrical input and supply stated in writing
  • Safety devices listed on the quotation
  • Equipment and installation as separate lines
  • Delivery and lead time confirmed in writing

Tell us the duty

Fill this in and send it straight to our sales desk on WhatsApp or by e-mail. Nothing is stored on this page.

Tell us the application and the gas output you need, or simply describe the work. Or call +880 1767-004433.